| 传动滚筒安装的注意事项 |
| 添加时间：2019/11/4 14:20:30 浏览次数： |
| 传动滚筒安装的注意事项 Precautions for installation of driving drum 传动滚筒是带式输送机传递动力的部件，大家可能对它的知识已经有了一个简单的了解，今天为大家带来的是传动滚筒安装的注意事项： The driving drum is a part of the belt conveyor to transmit power. You may have a simple understanding of its knowledge. Today, what you bring is the precautions for the installation of the driving drum: 1、装轴前把传动滚筒内部清理干净; 1. Clean the inside of the transmission drum before installing the shaft; 2、游动轴承座安装时要求轴承两侧有相等游隙; 2. When installing the traveling bearing seat, it is required to have equal clearance on both sides of the bearing; 3、传动滚筒需进行静平衡检测，其精度等级为G40; 3. The transmission drum needs to be tested for static balance, and its accuracy grade is G40; 4、焊接处焊缝高度大于幅板厚度。 4. The height of the weld joint at the welding position is greater than the thickness of the web plate. |
| 上一页 无动力滚筒由以下及部分组成: |
| 下一页 传动滚筒是输送机传递动力的部件 |